ESD5111T | GAC Multi-VDC / Temperature Compensated

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

EDG6000 - Programming Interface Assembly with Serial Port

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

1 Turn / 5KΩ / With Knob

Multi-VDC / Switchable Soft Coupling and Lead Circuit

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

1 Turn / 20KΩ / With Knob / Droop Control

24VDC / Terminal Strip

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

24VDC / Standard Unit

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

M5 I.D. End and Thread 14mm Deep

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

12VDC / Standard Unit

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2