EC1331 | GAC JDR Series - Mating Connector Kit / 6-Terminal

12VDC / Standard Unit

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

Multi-VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / MTU M-DEC to GAC LSM/SYC

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

12VDC / Terminal Strip

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

24VDC / Packard Connector without Mating Connector

M6 I.D. End and Thread

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

24VDC / Standard Unit

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

110 Series - Mating Connector Kit / 2-Terminal

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

24VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector

10 Turn / 20KΩ / With Knob

10VDC (From Speed Control) / Fixed Speed

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing