LE1400-2 | GAC 4.3 in. 110mm - Actuator Control Lever - 1/4 in. 6.35mm Holes / Serrated Shaft

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

12VDC / Packard Connector without Mating Connector / Includes GA102

M6 I.D. End and Thread

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

24VDC / Universal / 4-20mA Input / 0-5VDC Output / Reverse Polarity

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Stainless

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / High Temperature Coil for Full Duty Cycle Operation / Not equivalent to Renault 5010438374 which has Saab Connector (Contact GAC for Renault Version)

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

Multi-VDC / One Element Speed Switch - Overspeed

24VDC / Terminal Strip

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

24VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

Multi-VDC / Light-Force (Low-Current Optimized PID)

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

10VDC (From Speed Control) / Variable Speed - Off-Road

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

12VDC / Packard Connector without Mating Connector

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

12VDC / Standard Unit

EDG6000 - Programming Interface Assembly with Serial Port

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

24VDC / Standard Unit with Idle

12VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE