ESD1100-12 | GAC 12VDC / Terminal Strip

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

12VDC / Packard Connector without Mating Connector / Includes GA102

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

10 Turn / 10KΩ

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

ALN Series - Clevis Kit Only

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

10 Turn / 20KΩ / With Locking Shaft

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

Multi-VDC / Overspeed Switch

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

USB to RS232 Adapter for PC Interface, GAC Recommended

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

10 Turn / 5KΩ / With Locking Shaft

180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

DPG100/101-F & DFT200 Handheld Configuration Tool

Multi-VDC / Standard Unit

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal