RSC672 | GAC 10VDC (From Speed Control) / Fixed Speed

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

10 Turn / 20KΩ / With Knob

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

Multi-VDC / Switchable Soft Coupling and Lead Circuit

USB to RS232 Adapter for PC Interface, GAC Recommended

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

110 Series - Mating Connector Kit / 2-Terminal

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

12VDC / Packard Connector without Mating Connector / Includes GA102

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

24VDC / Light-Force (Low-Current Optimized PID)

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized